IEEE 802.3af/at PoE compliant for simplified deployment and installation.
Up to 30W per PoE port (total power budget: 130W) for powering PoE-enabled devices.
Auto-detection of powered devices (PD) and power consumption levels.
Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE transmit distance of 200m at speed of 10Mbps.
Port-based VLAN and Loop Protection features
Supports 802.1p Quality of Service (QoS)
Power over Ethernet (PoE+) Auto Detection
Features eight IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30 watts of electricity per port. It can convert standard 100‐240V AC power into low‐voltage 50 - 57V DC electricity to power IEEE 802.3at compliant network accessories via existing LAN cables. With PoE detection capability, the ES-1008P V2 is able to verify whether the connected device is IEEE 802.3at compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable – meaning easy setup and management of network devices such as access points and network cameras.